Aluminium Tile trim

Aluminium tile trim Finishing edge trims are designed to provide protection and decorative edging for tiles and carpet.

Trims are available in Brass, PVC, Aluminium and Stainless steel and a range of colours and finishes.

were developed as a handsome edging profile for the corners of tile or stone decorated walls. They are smoothly rounded and available in a variety of materials. Aside from their protective function, they can also be used for attractive decoration design purpose. They are also suitable for use as a covering as skirting for tiled or carpeted parquet or natural stone floors. They give solution to the wall corner decoration, provide aesthetic improvement. High-quality formed pieces are available for joining profile sections together. size  6 mm to 12 mm tiles x 2. 5 meter

Installation:

1.       Profiles should be chosen to match the thickness of the tiles.

2.       Tile adhesive should be applied around the junction using a serrated trowel.

3.       Press the profile into the adhesive (mortar etc.) bed and align it.

4.        Spread mortar over the entire surface of the joint.

5.       Press in tiles firmly and align them so that they are flush with the top edge of the profile. Lay the tiles without leaving any gaps.

Maintenance:

These profiles do not require any special maintenance. If they become , they can be simply cleaned with conventional cleaning agents.

Data sheet:

Material                      Height

PVC                         6/8/10/12mm