A U–bolt is a bolt in the shape of the letter U with screw threads on both ends. U–bolts have primarily been used to support pipework, pipes through which fluids and gasses pass. As such, U–bolts were measured using pipe-work engineering speak.      

A rivet is a permanent mechanical fastener. Before being installed, a rivet consists of a smooth cylindrical shaft with a head on one end. The end opposite the head is called the tail. On installation the rivet is placed in a punched or drilled hole, and the tail is upset, or bucked (i.e., deformed), so that it expands to about 1.5 times the original […]

  A twist tie is a metal wire that is encased in a thin strip of paper or plastic and is used to tie the openings of bags, such as garbage bag or bread bag. A twist tie is used by wrapping it around the item to be fastened, then twisting the ends together (thus the name). They are often included with boxes of plastic food […]

 flange nut is a nut that has a wide flange at one end that acts as an integrated, non-spinning washer. This serves to distribute the pressure of the nut over the part being secured, reducing the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface. These nuts are mostly […]

Geared continuous hinges are the best option for high-traffic doors, but only if you choose the right duty hinge for the job. Install a standard duty hinge on a high-traffic, abused or heavy door and you won’t enjoy the long-lasting benefits the right hinge can deliver.

  The S hooks are manly using for the ceiling fans and this is great in those bathroom stalls with wet floors. Using an s-hook over the top lip of the hinged door, create your own spot to hang a pocketbook, day pack, backpack or any tote bag type of item you don’t want on […]

Use snaps anywhere that you want to be able to quickly connect and disconnect two pieces of bondage gear. They are great for use on leashes, cuffs and tethers and so much more. We have largest collection of N.P. Snap Swivel

Lifting eye nuts are marked with their thread size NOT with their rated capacities. Make sure you select the correct eye nut based on its type and capacity for the lift you are conducting.

Eye bolts are marked with their thread size NOT with their rated capacities. Make sure you select the correct eye bolt based on its type and capacity for the lift you are conducting. Use plain or regular eye bolts (non-shoulder) or ring bolts for vertical loading only. Angle loading on non-shoulder bolts will bend or […]

Sleeves are precision parts for specific requirements in different sectors of industry, like the automotive industry, electrical industry, machine building, etc. Wherever moving elements need to be bedded, reinforced or centered sleeves will be the right answer. All sleeves are manufactured from tube. It is probably the most cost-efficient way of fabrication. The use of […]

vibrations through to the chassis of the vehicle. A vibration bush or rubber bushing is a type of vibration isolator It provides an interface between two parts, damping the energy transmitted through the bushing. A common application is in vehicle suspension systems, where a bushing made of rubber (or, more often, synthetic rubber or polyurethane) separates the faces of two metal objects while allowing a […]

Tap and dies are metal threading tools. Taps make internal threads inside a hole and dies make external threads on a round rod. They are often used for re threading (cleaning up existing threads. We have all the varieties of Tap Set from India

The Flat Hinges is commonly used on interior and exterior doors because it is neat looking. It consists of two rectangular leaves with screw holes. The leaves are joined by a pin or metal rod. Withdraw this pin and the leaves will separate, handy for when you want to take down the door. Both leaves are […]

Spring wing type hollow wall anchor designed for use in block, wallboard and other hollow base materials. The Spring-Toggle is a two-part assembly consisting of a machine screw and a spring wing toggle. Easy to use and works in a variety of base materials.

Using a hammer to drive in nails – as well as for many other jobs – is certainly do-able with low vision or no vision. Some people imagine bruised or broken fingers that result from hammering, but this is not the case; in fact, many persons who are blind or have limited vision use a […]